Product Details

Neurotrac Myoplus PRO

Single Channel EMG, NMES, ETS   (inc wireless software kit)

New and Improved touch-screen with full colour display. The new user friendly interface makes it a self-explanatory unit with the interactive learning on the go, including electrode placement, running EMG graph, EMG biofeedback, Games and Templates as well as many other helpful tools.

Features:

• Pre-set programmes for Incontinence treatment and neuro-muscular Rehabilitation. Includes 22 Preset Pelvic Floor,  25 Preset Rehab Programs and 3 Preset TENS Programs.
• 10 Customised programs for EMG, STIM or ETS.
• Designed for Physiotherapist in mind to be used as a portable tool. Suitable as a personal trainer for in-clinic or home use (under guidance).
• Single channel EMG (Biofeedback)
• Single channel ETS (EMG triggered stimulation)
• Simple single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme.
• Multilingual full color display screen and voice prompts for Biofeedback.
• Manual and Automatic threshold control.
• EMG Biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).
• Stand alone device or used in conjunction with established multilingual software.
• Up to 10 meters of wireless connection for NeuroTrac Software.
• For home users: Produces and prints (with the optional PC Software) the comprehensive patient progress reports on a day to day basis providing average readings on work/rest, peak, onset and muscle release times, work and rest deviations and the average mA current.
• Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and Neuromuscular stimulation.

Product Specifications:

1. EMG
   1. 0 Single channel EMG
   2. 1 EMG Range: 0.2 to 2000 μV RMS (continuous)
   3. 2 Sensitivity: 0.l μV RMS
   4. 3 Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz
   5. 4 Selectable Bandpass filter – 3db Bandwidth,
      1. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% – Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% – Reading above 235 microvolts
      2. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%
   6. 5 Notch filter: 50 Hz (Canada 60Hz) – 33 dbs (0. 1% accuracy)
   7. 6 Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
   8. 7 Work / Rest periods: 2-99 seconds
   9. 8 Number of Trials: 2-99

1. 2. NMES, TENS and ETS
1. 2.1 Single channel Stimulator
2. 2.2 Amplitude: 0-90 mA into 500 Ohm load – actual mA will tend to be less than indicated due to Electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA.
3. 2.3 Type: Constant current, maximum output voltage 70 Volts +5 / -10 Volts
4. 2.4 Waveform: Symmetrical, rectangular, bi-phasic with net zero DC current
5. 2.5 Pulse width selection: 50-330 μS (10% accuracy)
6. 2.6 Pulse rate selection: 2-100 Hz (5% accuracy)
7. 2.7 Work / Rest periods: 2-99 seconds
8. 2.8 Time 1 – 99 minutes
9. 2.9 Ramp up time: 0.1 – 9.9 seconds
10. 2.10 Preset and user programmable treatment Programs
11. 2.11 Automatic output shut off with detection of open electrode above 10 mA (+/- 2mA).

Dimensions:  Length 150 mm, Width 89 mm, Depth 35 mm.

Weight: MyoPlus Pro device: 140g (without batteries).

NeuroTrac Myoplus Pro comes complete with:

• 4 x 1.5V AAA Battery
• One packet of 50mm x 50mm skin electrodes
• One packet of 2 Patient Lead Wires
• One Earth/Reference Lead Wire
• Operating manual
• Software Kit
• Soft carry case
• 1 year warranty on the unit only.

Optional Accessories:

• NEUPROBE: Vaginal Probe